REA VeriCube DPM
with DOME Illumination
A high first read rate is of outstanding importance for
barcodes. Non-readable barcodes force manual entries
and increase the risk of errors. In addition to time delays,
this leads to disruptions in the operating process.
The REA VeriCube DPM (Direct Part Marking) verifies the
code quality of 2D codes. With the modern code verification
device, you will quickly find out how you can
improve the reading rates of the tested codes. With the
help of the detailed measurement results the code
quality can be optimized.
REA VeriCube DPM is designed for parts with high-glossy
surfaces and is used in all industries, both in the medical
product sector, such as surgical instruments, and in the
automotive and electronics sectors.
Whether lying, standing, or from top to bottom, virtually
any test sample can be measured contact-free in the
optimum measuring position.
The measuring system is based on a high-precision
optical module with a CMOS camera chip. During the
measuring process, ambient light influences are avoided.
The measurement of optical codes in compliance with
defined angles, distances and illumination allows
accurate and reproducible measurement results and
quality evaluations.
The measured values obtained are transferred to a PC
with the REA TransWin32 Evaluation Software for
evaluation and processing.
Features
n DOME Illumination
n Contact-free measurements by a CMOS camera
n Matte white tube insert in the measuring room for
extremely diffuse illumination
n Easy exchangeable camera modules to adapt to different
code sizes and measuring distances
n Different focus positions (0, +15mm, +45mm) above
the glass pane to measure parts where the code cannot
be placed on the pane with distance 0
n Selectable diffuse illumination (red or white light)
n Designed to operate in 3 positions to meet different
measuring requirements: sidewise, in upright position
and upside down. For complex 3D geometry parts the
REA VeriCube diffuse is mounted in a stand.
n Verification according to ISO/IEC 15415 for printed
matrix codes
n Verification according to ISO/IEC TR 29158 (formerly
AIM DPM guideline 2006) for direct part marking
matrix codes
n Verification in compliance with GS1 specifications
n Verification of GS1 data structures,
ISO/IEC 15459-x series of standards
and ISO/IEC 15418 / ANSI MH10.8.2
data structure analysis
n Verification of optional parameters for
optimizing the print process
n Multilingual user interface and reports
n For ease of use, settings can be stored in
customized profiles for fast selection
n Specific code selection to meet the
pharmaceutical industry demands
n Power supply via network cable
(Power over Ethernet)
n Easy removable and
exchangeable glass cover plate
n Network-compatible PC
evaluation software TransWin32
for Windows (multi user capable)
n Option Audit Trail for 21 CFR
part 11 and CGMP requirements
optionally available
Verification of surgical instruments Verification of surgical instruments
Code Types
Matrix Code Types (2D):
Data Matrix, DPM-Matrix Codes, QR-Code, Dotcode,
Micro QR-Code, Aztec Code, PDF 417, MicroPDF, HanXin
Code, Composite Codes, more under development
Barcodes (1D):
EAN-13, UPC-A, UPC-E ohne/mit Add-On, EAN-8,
2/5 Interleaved, ITF-14, Frachtpost, Code 39,
PZN-Code, Code 32, Code 128, GS1 Databar,
GS1 Databar Composite
Optional Codes:
2/5 3 Bars, 2/5 5 Bars, 2/5 IATA, 2/5 Baggage,
2/5 DHL Express (Frachtpost-Code), Code 39 Full ASCII,
Code 93, MSI, Plessey, Codabar Monarch (18),
LAETUS Pharmacode, LAETUS Mini Pharma Code
Options:
REA VeriCube stand, optional Symbologies, ScanLink,
Article Look up Software, Data Analysis
Data structures and properties:
n GS1 data structures (GS1 DataMatrix, GS1 QR-Code,
GS1-128, GS1 Databar, Composite)
n ISO/IEC 15418 / ANSI MH10.8.2 data structures
(AIAG, Odette, VDA, EDIFICE, HIBC, DOD, UPU…)
n EFPIA and PPN support for pharmaceutical industry
n Check digit control settings
n Size control settings
n Customizable date verification
n Measuring accuracy compliant to ISO/IEC 15426-2 and ISO/IEC 15426-1
n Red LED light 660 nm or white LED light, 4.000 °K
n Exchangeable camera module, resolution 2592 x 1944 pixel
n Camera focus and aperture pre-adjusted by factory
n Flip key panel to accomodate to preferred measuring position
n RJ45 Ethernet port for TCP/IP communication and PoE Power supply
n Key panel with on/off, Scan and customizable function keys
n Size: 200 x 150 x 150 mm (w/l/h), with key panel 210 mm width
n Weight: 2.600 g
n Windows 10 or later, 64bit support. The Audit Trail option requires
a 64-bit Windows version.
Specifications